Well, I've seen many guides to put retail snow leopard working on P5K but none worked for me, so I got another way.

Here it is:

1. Download SnowOSX v1.5 (google is your friend, SnowOSX is a distro like iDeneb and iATKOS)

2. While downloading SnowOSX, lets prepare the additional files we need. Download this archive and extract it to a folder inside a pen drive or external hard disk.

3. When SnowOSX download is done, burn it to a DVD (single layer is fine).

4. Boot from the DVD.

5. Open disk utility and format your desired hard drive. Also, you can't have other systems installed on that hard drive, only Snow Leopard because if you have, it will not work. Choose GUID when partitioning. You can use MBR too, but I didn't tested if this works with it so GUID is preferrable.

6. Close Disk Utility and open Terminal. Write:
cd /
sh MakeDSDT SnowLeopardPartitionName

When it asks to press any key, press enter (I don't know if it was a problem of my pc but only enter skipped that)

Then, when it asks for Darwin, Windows, etc. Write 0 and press enter. (it chooses Darwin).

7. Now you are done to start the install. Install Snow Leopard on the desired partition and leave all the default selections (don't click Customize, just Install).

8. It will take some time, after its done reboot.

9. Now, let Snow Leopard start and.... Kernel Panic!!! Its easy to fix, don't worry.

10. Insert your pendrive/external hard disk, boot from SnowOSX DVD again and open terminal. Write:
cd /Volumes/PenDriveName/FolderWhereYouPutTheKexts
cp -R * /Volumes/SnowPartition/System/Library/Extensions/
diskutil repairPermissions /Volumes/SnowPartition/System/Library/Extensions

11. Reboot. When you come to the Snow Leopard bootloader press F8, write -v and start.

12. Enjoy Snow Leopard :P Now you only need to set EFI strings for your graphic card and its fully functional.

Note: You only need to start with -v the first time.

If you are not using any ata drives at all the jmicron kexts are not needed. Actually I never used Jmicron at all when I was still using an IDE drive fro my old dvd burner and old HD. Used another drive though. Still if ya are only using sata straight through the jmicron feels a bit to much, but I will try your method in a day though and crossing me fingers ( have 64 bits kext for me graphic card and sound card allready so I should be prepared

Yeah, I forgot about that :P Good luck when you try it

It should work without big problems :P

EDIT: Duh, my new signature isn't working yet

EDIT 2: It's working now :P Bad quality but now it works.

---

I have only one HD wich has partition with Leopard 10.5.8 with Boot 132 and Chameleon for HDDrivers (this one is without graphic interface), and another partition wich I just installed a Snow Leopard from SnowOSX, I already patch DSDT, but when I'm trying to boot Snow Leopard with choosing that partition, nothing happend. The cursors spin for a wile and black screen.

What I did wrong

That happened to me the first time... I needed to install the bootloader manually into my leopard partition by going to /Volumes/SnowOSX/System/Installation/Packages (I think its this, i dont remember very well). After that SnowOSX booted but Leopard stopped to boot :S

So I did a fresh install of SnowOSX without leopard, because I knew Snow Leopard worked :P

---

thanks for the great tutor, i got this SnowOSX disc, i know they excluded all the languages except english and Russian.. if i need to view other text encode on safari or type out other languages.. will it show? i got the same mobo as yours, i really want to try out this install ,thx for your great help sorry for the broken english.

I installed bootloader and snow_bootloader but still the same black screen

Hi.


After trying 10a432 for several days, at last I succeeded in installing 10a432. ( 80% : sk1nhd33t`s Guide , 20% : my trial )
[ My PC : ASUS P5K + E6750 + 8600GT + SATA HDD ]





[ Essentials ]


1. A 10a432.dmg

2. BIOS : SATA Mode - Enhanced

3. An installed Leopard ( I am using iDeneb_v1.6_1058_Lite )

When I installed Leopard, I made 3 GUID Partitions as the following:

Start by booting into your Leopard DVD and firing up Disk Utility. Select the disk you will use, and click on the "Partition" tab. Change the "Volume Scheme" drop down menu to "3 Partitions", and then click "Options...". Select GUID, and click ok.
( My 1st partition is iDeneb1058. My 2nd partition is 10a432. My 3rd partition is 10a432dvd. )

4. 2 blank GUID Partitions ( 10a432 Partition & 10a432dvd Partition )

5. DSDT Patcher GUI 1.0

6. 10a432p5k.zip ( unHideIT.v1.1.dmg + KextUtility.v2.3.2.dmg + AppleIntelPIIXATA2.kext + sk1nhd33t folder + AppleAzaliaAudio.kext )


( In sk1nhd33t folder )
cameleon-RC1-r431
pc-efi-10.1
Extra folder
apple.com.Boot.plist
smbios.plist
Extensions.mkext
Extensions folder

( In Extensions folder )
dsmos.kext
NullCPUPowermanagement.kext
PlatformUUID.kext
Openhaltrestart.kext
LegacyAppleHDAHardwareConfigDriver.kext
LegacyHDAPlatformDriver.kext
SleepEnabler.kext
Theme folder




[ Installation ]




1. Install cameleon-RC1-r431 on Leopard, and replace the installed boot file in the root of Leopard with the boot file in pc-efi-10.1.
( Show all hidden files by using unHideIT.v1.1. )
( From now on Leopard manages the boot infomations, so you don`t have to install chameleon-RC1-r431 & pc-efi-10.1(boot file) on 10a432 & 10a432dvd. )



2. Restore 10a432.dmg to 10a432dvd by using Disk Utililty in Leopard ( Destination: 10a432dvd, Image: 10a432.dmg ).
( If you look at an Icon of MAC OS X Install DVD and a Window of MAC OS X Install DVD, just close the Window of MAC OS X Install DVD, otherwise you may get an "Install Failed" message )
( In this step, don`t put other things [boot, kext, dsdt.aml ...] into 10a432dvd, otherwise you may see the KP[Kernel Panic]. )



3. In the Desktop of Leopard, make the contents of Extra folder as the followings, and then copy the Extra folder to the root of 10a432dvd.


- Extra folder in the Desktop of Leopard

ㅇ apple.com.Boot.plist ( If you want, paste your gfx string in this plist. )
ㅇ smbios.plist ( Remove this plist. My 10a432 is likely to automatically get my system infos of the System Profiler without it. )
( Don`t put UUID into apple.com.Boot.plist and PlatformUUID.kext. )
ㅇ Extensions.mkext
ㅇ Extensions folder
ㅇ dsdt.aml ( Install DSDT Patcher GUI 1.0 on Leopard, and then put the installed dsdt.aml in the root of Leopard into the Extra folder of the Desktop. )
( If you have your compiled/edited DSDT.aml, drop it into the Extra folder of the Desktop. )
ㅇ Theme folder ( Remove. )


- Extra/Extensions folder in the Desktop of Leopard

ㅇ dsmos.kext ( If you use fakesmc.kext in this step, you may see the KP. But, after seeing the Desktop of 10a432, you can use fakesmc.kext. )
ㅇ NullCPUPowermanagement.kext
ㅇ PlatformUUID.kext
ㅇ Openhaltrestart.kext
ㅇ LegacyAppleHDAHardwareConfigDriver.kext
ㅇ LegacyHDAPlatformDriver.kext
ㅇ AppleIntelPIIXATA2.kext ( iATKOS 10.5.7 )
( After seeing the Desktop of 10a432, Use SleepEnabler.kext. )
( Don`t use your kexts for /System/Library/Extensions in this step, otherwise you may see the KP. )



4. After booting to 10a432dvd partition [-v -x32 or -v -f -x32 ], erase 10a432 partition by using Disk Utility and then install 10a432 on 10a432 partition.
( I didn`t install printer, rosseta, x11, quicktime7 )
( This step is very important. If you skip this step, you must almost see the KP. )
( Thanks to this step, we don`t have to put UUID into apple.com.Boot.plist and PlatformUUID.kext. )
( Installation Time goes and comes from 20-minute to 17-minute. If you see 15-minute, you will mostly succeed. When you see 8-minute, the installstion screen will be black.
Just click it by using your mouse, and it will come back. ^^ )



5. First of all, go to Leopard, and then copy the Extra folder in the Desktop of Leopard to the root of 10a432 partition by using Terminal.

( In this step, you can use your kexts for /System/Library/Extensions, by the way if you use them, you will see the KP within a minute.
But, don`t worry. After rebooting, you can solve this problem by using Disk Utility & Kext Utility. )
( I didn`t use the permission commands [chown & chmod]. )
( You can put AppleAzaliaAudio.kext into /System/Library/Extensions. )

Last login: Wed Aug 26 03:21:49 on console
chivalry-whites-mac-pro:~ whitechivalry$ sudo -s
Password:
bash-3.2# cp -R /Users/whitechivalry/Desktop/Extra /Volumes/10a432
bash-3.2# cp -R /Users/whitechivalry/Desktop/work/10a432me/audio/org/AppleAzaliaAudio.kext /Volumes/10a432/System/Library/Extensions



6. It is time to go to 10a432. [-v -x32 or -v -f -x32]



7. On going to the Desktop, use Disk Utility [ RepairPermissions ] & KextUtility.v2.3.2.dmg.

Hi, imacosx.

If you dislike my post, I will edit it.

thank you your post imacosx i used your guide to install on dell inspiron 518 only mods are power suply and 9600 gt ,installed card with efi strings and kext for Ethernet it is sweet thanks again