10.5.3 installed! Any comment about it... - Page 2

bajanboy · #11 06-09-2008, 04:33 AM

I just installed the 9.3.0 kernel using the Kayaway package but unable to reboot due to a kernel panic, does any one have any ideas?

note: This was after I successfully upgrade to 10.5.3 using Zephyroth's AU .5 upgrade utility.

System:
Motherboard:Asus M2n32-sli deluxe
3 gig ddr2 memory
AMD Athlon 4200+ CPU
Graphic card:nVidia 7600gs 256mb

Voyn1x · #12 06-09-2008, 01:14 PM

@bajanboy - boot in verbose mode with -v and let us know the what the cause of the panic is.

Do you have the xcode developer tools installed by chance?

bajanboy · #13 06-10-2008, 02:57 AM

@Voyn1x - Thx for responding.

Yes I do have xcode dev tools installed, does this cause problems with kernel upgrades?, also I booted in -v and cant really make any sense of the output and unable to capture any of the output but I did make a note of some of the output. I hope that this can give you enough to help.

dsmos: Initializing
dsmos:Boot and decryption contexts set !
panic(cpu 1 caller 0x001A8CD4) kernel trap at 0x477b1618, type 13=general protection registry

error code : 0x00000000

kernel loadable modules at backtrace with dependancies)
com.apple.iokit .CHUDKernelLib (15618)@0x477b000

is there anyway that the -v output can be piped to a file?

Thanks,

Voyn1x · #14 06-10-2008, 08:21 AM

Hi bajanboy,

boot in safe mode -x, run from somewhere in Developer directory chud-uninstaller, and reboot. all will be fine.

If you can't fnd the uninstaller, just remove all the chud kexts in the extensions folder.

it's something to do with the current modbin 9.3.0 kernel being just bin patched to work on hackintosh ie. not an offical release. I had the same problem when I upgraded to 9.2.2, before that i had no problems at all.

bajanboy · #15 06-11-2008, 02:08 AM

Hi Voyn1x,

I could not find the chud-uninstaller but was albe to delete all of the CHUD kexts but still getting the kernel panic. I remember having this problem trying to install 9.2.2 but never really tried harder. I would really like to get this to work, as I said I upgraded to 10.5.3 without any issues. I also have Leo running on another drive so I can play this without causing any problems. Is this because of the xcode tools that are installed?
Do you have any more suggestons?

thx

Voyn1x · #16 06-11-2008, 08:32 AM

Firstly make sure you've removed all chud kexts and that the kernel panic is still caused by the chud framework.

Secondly try flushing the kext cache by booting with -f

Yes the chud framework is installed as part of the xcode

Puttabong · #17 06-11-2008, 12:50 PM

Hi bajanboy,
as Voyn1x said correctly, if you still see the same kernel panic then you didn't delete the chud kexts properly.

So you should try it once again! Here's a link:

http://www.infinitemac.com/kernel-panic-after-installing-xcode-on-osx86/

cgsheen · #18 06-11-2008, 06:57 PM

I just reinstalled 10.5.2 on my main desktop computer after having done some upgrades to it and our other computers. I tried out Zephyroth's ASU and it installed the 10.5.3 upgrade perfectly. I even loaded the 9.3 modbin kernel after that worked so well. Looks great to me. Here's how my Desktop looks now (previously this MB was in my HTPC):

It's essentially my "2nd working Zephyroth 10.5.x Install":

MB: Gigabyte GA-K8N51GMF-9 - nForce 6100/430 (I/O Winbond W86327) Socket 939
CPU: Athlon™ 64 X2 Dual Core Processor 4200+
Video: Gigabyte 8600GTS 256MB PCIe ( QE/CI )
LAN: Airlink+ AGIGA32PCI (Realtek RTL8169) PCI gigabit network adapter - onboard RTL8201 disabled
(optional) Wireless LAN: Airlink101 AWLL3026 802.11g USB (ZyDas software for 10.4.x)
USB: 1.0 & 2.0 (supported natively & working properly)
Firewire: Onboard VIA VT6307 IEEE1394 controller (supported natively)
Audio: Onboard Realtek ALC880 - ANALOG AND DIGITAL (S/PDIF) working
BENQ IDE DVD-+RW LightScribe optical drive
200GB Maxtor SATA HD
500GB Maxtor IDE HD
750GB Samsung SATA HD
Booting 10.5.3 off external 300GB USB HD for now - I'll move it to an internal drive soon..

bajanboy · #19 06-12-2008, 02:34 AM

Hi Voyn1x and Puttabong,

Thank you both for your help.

Well the CHUD issue is resolved but I am still getting the kernel panic, here are the last lines or output from booting with
-v

mDNSREsponder[35]: mDNSPlatformRawTime: this_mach_absolute_time 7ABDCxxxxxxx
xxxxxx-macpro31 kextd[10]: IOKitWaitQuite() timed out waiting to write kernel symbols
AppleNForceATA: found 0 units.

generalmilk · #20 06-12-2008, 09:05 AM

After changing zeph-amd-v2 to leo4allv3 I can install all the new kexts and new kernel!! wonderful!