|
#1
|
|||
|
|||
Ok removed the link. didnt know.
Okej i do not have Chameleon 2 as bootloader. do i need it? Found 2 dsmos one in the library and one in the System/library Removed dsmos from the both places and now SL does not boot anymore. silly me... hehe... '' Should install SL from the start again. But will go and find an USB 8GB to install it from USB. faster.. Do you running SL on your 6935G? I was Running iPC 10.5.7 with i uppdate from Apple it worked fine but would like to try SNOW..seems faster or better. Have you not any packed only to Acer 6935G kext. or i only need this too kext. in A_Falult?''' Hope you can answer soon will be pleased. Best regards KamalAhmad |
#2
|
|||
|
|||
Ah, definitely for sure! It is always best to generate your own. Use gfxutil method, I'll look for it too to include in the tutorial, but have to sleep now.
You're lucky because it seems we use the same PCI root like I described in my Leo tutorial, but that can vary quite easily. And maybe because mine is GDDR3, and 512gb ram, will most likely not take best use of your card. How is you audio working? _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ |
#3
|
|||
|
|||
i'm tring to understand something about the gfxutil metod ... plenty tuts around but also plenty confusion ! :-) This w.e. I will try to do something.
The sound is like in leopard : only 2 speakers no subwoofer. I didnt try the mic yet. Acer 6935g & Snow leopard 10.6.1 64 bit Core2Duo P8600 2,4Ghz | 4GB DDR3 1066 | Nvidia 9600m GT 1GB QE+CI @ 1920x1080 Full HD Broadcom 1490 Wifi (native airport) Audio | Ethernet | Bluetooth | Webcam | eSATA II | BlueRay DVD drive |
#4
|
|||
|
|||
ok !
I used gfxutil to get my vga hex string and I wrote it down in the com.apple.boot file. Now I have to modify NVDANV50HAL.kext and NVDAResman with the VGA vendorID & productID : how I can get them? PS: I dont have windows intalled on my HD anymore Acer 6935g & Snow leopard 10.6.1 64 bit Core2Duo P8600 2,4Ghz | 4GB DDR3 1066 | Nvidia 9600m GT 1GB QE+CI @ 1920x1080 Full HD Broadcom 1490 Wifi (native airport) Audio | Ethernet | Bluetooth | Webcam | eSATA II | BlueRay DVD drive |
#5
|
|||
|
|||
Well.. for me the string was all it took, woke up with vanilla install of SL.
I only needed special kexts for audio and ethernet... (albeit still have to test lots of stuff like speedstep... my fans are always mid speed, no sleep, no mic in, no vga out...) So maybe I too need to do that, but I have full QE/CI... dont know how to test openGL properly. Beware that xbench is far from accurate. Use Geekbench too! _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ Last edited by Gurruwiwi; 10-02-2009 at 06:50 PM. |
#6
|
|||
|
|||
Quote:
here is mine Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03) 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 9600M GT [10de:0649] (rev a1) 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0) 05:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01) 06:00.0 Network controller [0280]: Intel Corporation Unknown device [8086:4232] _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ Last edited by Gurruwiwi; 10-03-2009 at 08:52 PM. |
#7
|
|||
|
|||
Can i Change to Fakesmc from dsmos?
HI, Gurriuwiwi...
Okej, I get the picture Gurruwiwi. I Installed OSX Snow Leopard and it working greate, some trimming to do. I used folowing kext. AtlansicL1eEthernet.kext = Networkdriver VoodooBattery.kext = Batterystatus (buggy) VoodoHDA.kext Chameloeon 2 RC3 Used your string for GraphicsCard (Nvidia 6900M GT 512MB) and used the program EFIStudio to write it to com.apple.boot.plist and it worked fine. So my question is:. Have you fixed the kext for: audio Cardreader (THIS WORKED FOR ME ON LEOPARD BUT NOT IN SNOW...) If you have Information please share, what kext do you use for that? PS: I will look to replace dsmos to fakesmc V2 when i get the information how to do it. BEST REGARDS / KamalAhmad Last edited by KamalAhmad; 10-04-2009 at 01:16 PM. |
#8
|
|||
|
|||
A have SnowOSX Universal 10.6 v3.5 distro and installed it from dvd.
Okej i Restore it to USB and install it from DVD and put the A_Fault_. Folder in the root. But why must i changed files and must i have another mac and remove the HD from my laptop 6935G. I installed it from the dvd directly and it worked but the Network and audio didnt work. So what is the different than your way? I can install chameleon 2 Rc3 too should it be different? In what way? I only wounder why... BEST REGARDS... |
#9
|
|||
|
|||
INFORMATION ABOUT THIS DVD I USE.. MAY IT HELP TO EXPLAIN MY PROBLEM?
--- SnowOSX Universal 10.6 v3.5 Distro --- This is the first pc hackintosh distro dvd for a pc its works fabilous check it out! Its like Ideneb ore iatkos but it is 10.6 golden master. Cheers! For info check google and look down for the drivers wo are included: NL: Hier is de eerste distro dvd versie van osx snow leopard 10.6 hij wwerkt perfect het is de retail versie en heeft deze drivers: In Customise: Snow_bootloader - Loader Chameleon 9-4 NullCPUPM - disabler for IntelCPUPowerManagement SMBIOSResolver - Mac model iMac9,1 OpenHaltRestart SleepEnabler PS2 - kexts for PS/2 IntelPIIXATA_Fix - The modified driver for ATA� DVD-drives LegacyAHCIATA - Legacy kexts on Intel AHCI (SATA), Intel ATA (IDE), JMicron ATA. Are especially recommended for owners ICH9! IOUSBFamily-build - The new version of the original driver (went together with original DVD) Rosetta - support old applications ATools_Snow - A folder with a system utilities and drivers Into ATools folder: /ATools/ AppCleaner.app BetterZip.app CandyBar.app Change Finder Clone X 3.app CPU-i.app ForkLift.app HexEdit iGetter.app IORegistryExplorer.app KCNScrew.app Kext Utility.app Monolingual.app OnyX.app OSX86Tools.app Property List Editor.app TinkerTool.app Xbench.app /ATools / _ Drivers/ AppleACPIPS2Nub.kext AppleIntelPIIXATA.kext ApplePS2Controller.kext AppleRTL8139Ethernet.kext CPUi_snow.pkg dsmos.kext (from Netkas to 10a432) HDEFInject.kext LegacyAppleAHCIPort.kext LegacyAppleIntelPIIXATA.kext LegacyAppleYukon2.kext LegacyIOAHCIBlockStorage.kext LegacyJMicronATA.kext NVInject.kext OpenHaltRestart.kext PlatformUUID.kext SleepEnabler.kext SMBIOSResolver.kext TARUGA_SNOW VoodooHDA.kext /ATools / _ System/ Beta_decrypter_for_10a421a_32_64.pkg bootsnow-9-4 Chameleon_DFE_for_Hard_Disk.pkg Chameleon-2.0-RC2-r640.pkg /DSDTPatcherGUI_1.0/ EFIStudio.app Pacifist_2.6.dmg Video:and download this: kexts.com/view/3-chameleon_2.0-rc2.html install that in osx on your snow leopard drive so you can dual boot Cheers! |
#10
|
|||
|
|||
Like I said, there are many ways to do things, and since Snow is this young, I prefer to install everything manually to have control. It is very easy to follow, and you will learn how the OS is built up.
Yes, it might have worked ok for you, but might not work for everyone! With my tutorial, the only difference is that it is not pre-patched like your distro to do automated stuff. Plus, it is already "outdated" as it still uses dsmos. fakesmc is better and faster and way more compatible for most people. Also using chameleon 1 will certainly complicate life of many people. All in all, basically you get the same thing, except my tutorial, although more "hands on" will certainly offer a better solution. If you stumble across a problem it is WAY easier to identify the cause and fix it, with distro's you are lost if you are not a Terminal ninja. But, if it worked for you, congratulations! now you only need to find the right kexts for your missing hardware. _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ Last edited by Gurruwiwi; 10-03-2009 at 09:25 PM. |