#231
|
|||
|
|||
Quote:
and how to enable QE/CI on my VGA 9600GT 512MB Last edited by Maleo; 03-14-2010 at 03:09 PM. Reason: insert screen shot |
#232
|
|||
|
|||
Quote:
I can also change to the osx cd and start it.. it starts to load alot of files and then after a while i get a kernel panic. so i tried cpus=1 -f -v -x -s and could see it loaded alot of file http://dl.dropbox.com/u/3346837/PICT1847.AVI <-- little video of what it is doing. After a while it stops with this screen http://dl.dropbox.com/u/3346837/PICT1850.JPG and when i hit return i get this http://dl.dropbox.com/u/3346837/PICT1861.JPG Sorry for shitty pictures Anyone how has an ide of what is wrong and who can put me in the right direction or maybe to site where i can find more info. maybe i am looking in the wrong places coz. can't find any info. Your can get more info in my signature mobo : Asus M4A79T Deluxe AMD 790FX/SB750 Cpu: Amd Phenom II X3 720 bt Ram: 4 gb ddr3 pc3-10666 (2x2) Grafik: Asus EAH4870 1gb (ati4870) Lan: onboard Realtek 8112 Gigabit |
#233
|
|||
|
|||
I am getting exactly the same things.
|
#234
|
|||
|
|||
Quote:
Thank you |
#235
|
|||
|
|||
Chameleon not booting
I am a noob at hackintosh. I followed the steps to install snow leopard on amd pc. Restored image to thumb drive.
Installed chameleon rc2, but failed. I only succeded after changing the additional options to chameleon efi hfs and not the standard. As a result, the bootloader boots but is unable to boot from my os x install usb. Can any one help me with this? By the way, the usb is not in GUID partition. |
#236
|
|||
|
|||
Quote:
crash after opening :" Have you figured out why this is happening? I've installed CS5 Master suite and everything works but Illustrator. I got CS4 to open by removing an palette plugin, but I can't get CS5 to open. Photoshop, InDesign and the rest are fine. Any ideas or recommendations would be greatly appreciated. DRD2 __________________________________________________ _____________________ Snow Leopard 10.6.4 Retail AMD Phenom X4 9850 2.5Ghz 4GB (2x2GB) DDR2 PC2-8500 MSI 785GTM-E45 Motherboard GeForce 9500 GT 512MB PCI-E |
#237
|
|||
|
|||
issues installing on amd
hi there i followed the example step by set and when i boot up i get the error
Boot0: GPT Boot0:Testing Boot0:Testing Boot0one Boot1: /boot would i need to install the Apple VIA kexts as i have a via chipset? |
#238
|
|||
|
|||
I have same motherboard
Mine has a phenom 2.5 and is running iatkos 10.6.3 very nicely using an nvidia 9500 gt card. I installed with just via chipset (supervia i believe it is) and nvenabler and I use NO NETWORK DRIVER at all and it detects my SMC gigabit card. the internal one is realtek 1000 or 8169 driver I believe but try no driver first because that may work. If i put in a realtek driver (either one) it detects card b ut doesn't connect to internet at all. in reg leopard 10.5.8 i used realtek 1000 driver, but discovered the no driver trick for Snow Leopard and have used it on other machines with realtek cards/chips. I can't seem to get 64bit to work though and I'm not sure why... (anyone have this MB working at 64 bit out there?) but with Quartz Extreme and 4 gigs ram, it's pretty damn fast! I also have a pentium Duo Quad machine running same drivers except it's intel chipset (same graphics same sound chip) and it runs 64 bit no problem. Best way to see if a MB will be 64 bit is just install chipset and nvenabler drivers first and see if it comes up in 64 bit. then add drivers one at a time for sound and network and check to see if still booting 64 bit.
Good luck! Last edited by mr_kite; 02-04-2011 at 09:26 AM. |
#239
|
|||
|
|||
I have same motherboard
Mine has a phenom 2.5 and is running iatkos 10.6.3 very nicely using an nvidia 9500 gt card. I installed with just via chipset (supervia i believe it is) and nvenabler and I use NO NETWORK DRIVER at all and it detects my SMC gigabit card . the internal onboard chip is realtek 1000 or 8169 driver I believe but try no driver first because that may work. (I have gigabit router so I disabled onboard chip) If i put in a realtek driver (either one) it detects card but doesn't connect to internet at all. in reg leopard 10.5.8 i used realtek 1000 driver, but discovered the no driver trick with Snow Leopard and have used it on other machines with realtek cards/chips. I can't seem to get 64bit to work though and I'm not sure why... (anyone have this MB working at 64 bit out there?) I also have a pentium duo core 4 machine running same drivers except it's intel chipset (same graphics same sound chip) and it runs 64 bit no problem. Best way to see if a MB will be 64 bit is just install chipset and nvenabler drivers first and see if it comes up in 64 bit. then add drivers one at a time for sound and network and check to see if still booting 64 bit. The AMD is nice though because it supports virtual machines so you can use parallels which I like better than VMWare which is all I can run on my intel machine...
Good luck! |
#240
|
|||
|
|||
SL on AMD Athlon II 250
I have followed the instructions at the site "http://www.ihackintosh.com/2009/09/install-snow-leopard-106-on-amd-pc-hackintosh/" to try to install SL on my system with an ECS IC780M-A motherboard with an AMD Athlon II 250 CPU (dual core 3.0 Ghz). It uses the Modbin test7 kernel. When I try to boot the installation I get the following error message after the gray screen with the silver Apple logo:
"panic(CPU 0 caller 0x2e71f459):"Unsupported CPU:family=0x10,model=0x6,stepping=0x2"@/SourceCache/AppleIntelCPUPowerManagement/Apple/IntelCPUPowerManagement-90/pmProcessor.c:210" Can anyone help? 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |