UHCI/EHCI Built in with dsdt fix - Page 15

wwbsox · #**141** 10-20-2009, 04:35 PM

@Pandar

If your referring to the USB fix. All you have to do is replace the usb section of your DSDT with what is in the original post.

If you need more detailed instructions just PM me.

Are you currently using DSDT for your graphics? If so... it will not affect that section. If you are wanting to add graphics to the DSDT than you will need to generate that portion of the DSDT, Device (PGEP), under Device (PCI0). I used ACPI patcher to generate that section.

kantok · #**142** 10-31-2009, 07:53 PM

Thanks wwbsox!
The combination of the methods works perfectly on my EP45-UD3P!
Wake-up issue by mouse and Keyboard has come!!

stayupforever90 · #**143** 11-04-2009, 07:57 PM

Hi Everyone

Thanks to wwbsox to start with, also everyone else who has posted in this thread it has been a lot of help. I am having a problem adding graphics to my DSDT, have searched for PEGP but could not find it. I can find it in registry explorer but have to admit not very good at that bit. Also I think there may be a problem with my SATA fix as SATA shows up as ICH10 AHCI but I cant remove the IOAHCIBlockStorage.kext I am using, if anyone could take a look at my DSDT that would be great. I am using a GA-G33M-DS2R mother board with core2duo E6600 and 4GB ram Nvidia 8800 GTS 512mb graphics running 10.6.1 Retail . Also wondering does anyone's graphics card show up in the PCI cards section of system profiler, and thanks in advance to anyone who takes the time to look at my DSDT

atomiX_X · #**144** 11-05-2009, 03:41 AM

Hi all. I've had a working SL setup for months now but I'm still unable to make my Asus P5E wake from USB. Sleep works fine while waking from power button but not from USB. I got this to work in 10.5 using a modified IOUSBFamily.kext but I haven't been able to find one for SL. I realize that this can be fixed with DSDT edits.

I've tried to simply replace the USB section with the one displayed at the start of this thread as wwbsox and others have said but I get a ridiculous amount of compile errors. I get the same results using DSDTse and iASLMe. I'd really appreciate it if someone could take a look. Please see attached and let me know if more specific info is required.

FYI, DSDT is already patched to fake ICH9 as ICH10 and as a result, all my USB ports show as built in and any mass storage devices connected survive sleep/wake.

wwbsox · #**145** 11-05-2009, 06:01 PM

@stayupforever90

I have the same video card and the DSDT that I attached to post #32 has the PEGP section that you are looking for.

I cant comment on IOAHCIBlockStorage kext as I dont use it. I believe there is a DSDT fix (by the King) to eliminate that on ProjectOSX site.

And Yes, I believe my video card shows up in the PCI card section of system profiler.

wwbsox · #**146** 11-05-2009, 06:15 PM

@atomiX_X

With your Asus board you cant just replace the USB section. Hence all the compile errors. But it looks like you added method (_DSM, 4..... to all of your USB devices with the correct device ID's. The EHCI devices are different than mine, (EUSB and USBE) not sure what difference this makes.

If the issue is only with not being able to wake from sleep using USB devices, check to see if your mouse/keyboard show up in system profiler under UHCI or EHCI (hi-speeed). If they show up under hi-speed usb that is the reason they will not wake the system from sleep. My Rocketfish apple mouse (USB 1) wakes the system fine. But my Apple Keyboard (USB 2) will not.

Since you have an Asus board, you might want to take a look at Master Chief's DSDT in the P5K Pro thread at insanelymac. He claims to have wake up from Apple Keyboard working on his board using DSDT edit. good luck.

atomiX_X · #**147** 11-05-2009, 11:45 PM

Thanks for the info wwbsox. I checked and my keyboard and mouse show up under regular USB and not high speed. I tried with another mouse and keyboard to make sure and same deal.

Now that you mention it though this isn't the only issue I've had but it has been the only one that bothers me. The machine also can't do a full hardware restart or shutdown on it's own. Not exactly sure why since I'm using OpenHaltRestart. I'm thinking these might be related.

stayupforever90 · #**148** 11-08-2009, 10:36 PM

Thanks wwbsox but have come across a very strange issue with adding the graphics fix to my dsdt.aml. I have added it with dsdt patcher and my typing it my self all with the same result. My dsdt compiles fine with only one warning as before but OpenGL stops working. By this I mean spinning squares test is not visiable in xbench and also OpenGL Extensions Viewer.app has only Apple software as the render and no choice for my graphics card. My xbench scores fall from around 170 to 110 and my OpenGL Extensions Viewer.app scores fall from in the 3400 range to 60-70 range. I have try'd all different ways of editing both my com.apple.Boot.plist the system one and the one in my extra folder all to no avail. I have try'd to enable OpenGL with the dev tools app Quartz Debug also, the app tells me it is enabled but has no effect. Two really strange things are that front row and chess work though, and I thought both these apps needed OpenGL to run. I have attached a copy of my dsdt with graphics if you could take a look and see if i have made a mistake thank you, just don't know where I am going wrong.

Ps My card did start showing up in PCI cards in system profiler, would really like to get this working any help would be great

stayupforever90 · #**149** 11-13-2009, 12:39 AM

Hey All

I have done it GFX are now fully working through through DSDT it seems the main issue was EFI strings. Let me explain I run a lot of different partitions for different reasons I have 3 snow leopard partitions 1 leopard partition there is also Linux and Windows 7 in the mix as well (see attached pic). I know its not the best but is just how things have gone as times gone by. Now I was trying to install the DSDT GFX to my SNOWGUID partition. First of all I did not remove the EFI strings from this partition's extra com.apple.Boot.plist but did remove the graphics enabler string. No joy the card would be in system profiler but i just had no QE/OpenGL working as such. So i spent some time working with DSDTSE.app as my DSDT is a bit strange any way. I try'd to many different with not much luck of inserting the graphics code with this great app (a big thank you to EvOSX86 for the app). Then I all most gave up and went back to EFI strings I say all most. My next step was thinking I have to be vanilla as possible so I disconected all of my drives apart from one and reinstalled Snow Leopard on a GUID partition and then I try'd a fresh DSDT.aml with USB SATA and GFX fix it worked how happy was I. Then I reconected my other two drives and it stopped working

. So from there I applied the same fixes to my other Snow partitions, but it didn't work on my main MBR Snow partition why? It seems at some time I had written my GFX string to my Library/Preferences/SystemConfiguration/com.apple.Bootplist once deleted I had working QE/OpenGL on all my partitions. I have feel have learned a lot from from doing this and just wanted to share my experience with others may be it could be of some use. For me I have learned EFI and DSDT do not mix but maybe thats just me. Am going to finish with a question though, how does Chameleon reference Boot.plists files from other partitions it is not booting though. And before you think it yes Chameleon was separately installed on all partitions. Thank you to wwbosx and all who have posted in this thread on to my next project speedstepping and sleep thank you again to all OSX86 fans

adityaxavier · #**150** 01-08-2010, 11:33 AM

Hi,

I was actually wondering if anyone know how to do it the other way round.. i.e. make the USB from built-in to external. Cause i have my bluetooth in USB3 and its turned off every time the laptop goes to sleep and doesnt work on wak..

Thanks,
Xavier