 |
|
#331
03-01-2010, 05:14 PM
|
|||
|
|||
|
A fews week ago I installed 10.6.2 using this guide. After a day or two everything was okay (most problems were related to getting QE/CI to work on my gtx275). So first: thanks to all contributors of this thread.
Not all dsdt patches were applied so I still have some shutdown irregularities. Today my hack went to sleep and gfx card fans went spinnging full speed. I held down the power button for five seconds to make it reboot. But during reboot i gets stuck now. Starting up using safe/verbose mode reports that it enters fsck_hfs and it doens't progress after ** Checking catalog file. I tried repairing it through disk utility on a macbook but everything seems ok from there. then i tried fsck -fy /dev/diskXsX in terminal this is the output Quote:
Last edited by mecanoiz; 03-01-2010 at 09:32 PM. 
|
|
#333
03-03-2010, 04:04 PM
|
|||
|
|||
|
hello,
To get rid of NullCPUPowermanagement/Disabler/SleepEnabler and to have low cpu temp/power consumption we must bringup SpeedStepping with AppleIntelCPUPowermanagement.kext. We must patch and integrate the SSDT into the DSDT. did anyone know how? thank you!
|
|
#334
03-05-2010, 02:29 PM
|
|||
|
|||
|
Quote:
The E/E/ only contains 'fakesmc' the E/ folder only contains DSDT.aml and com.apple.Boot.plist. The S/L/E/ folder only contains the 2 injectors for audio and lan. Can you post your BIOS settings?
|
|
#335
03-06-2010, 11:18 PM
|
|||
|
|||
|
Quote:
|
|
#336
03-07-2010, 07:55 PM
|
|||
|
|||
|
Help with download
Dear all! I can not download files for P5K-E Wifi A/P -64 bit mode from http://www.megaupload.com/?d=MGUAATG6
Is there other link? Or can you email me the file? Thank you.
|
|
#337
03-09-2010, 07:42 PM
|
|||
|
|||
|
2 Graficcards
Hello i have a problem.
 Lateinische Umschrift anzeigenI would like to install on my Asus P5K-E WiFi, a second vga card. I have 2x Geforce 8600 GT with 256MB. Unfortunately, I do not get 2 graphics cards to run simultaneously. See picture. If only one card had it, everything goes, it does not matter in which the 2 PCIE slots you inside it. It is only when I go both remove the DSDT file. Can someone help me? PS: Sorry for my bad English! Last edited by drapple; 03-10-2010 at 07:30 AM.
|
|
#338
03-19-2010, 07:39 PM
|
|||
|
|||
|
Quote:
Code:
### several DSDT patches for optimizing p5k-e-wifi/ap bios 1202
###fix for adding fixes
Method (NPTS, 1, NotSerialized)
{
}
//+ Method (DTGP, 5, NotSerialized)
{
If (LEqual (Arg0, Buffer (0x10)
{
/* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44,
/* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B
}))
{
If (LEqual (Arg1, One))
{
If (LEqual (Arg2, Zero))
{
Store (Buffer (One)
{
0x03
}, Arg4)
Return (One)
}
If (LEqual (Arg2, One))
{
Return (One)
}
}
}
Store (Buffer (One)
{
0x00
}, Arg4)
Return (Zero)
//+ }
Method (NWAK, 1, NotSerialized)
{
}
###shutdown fix
Device (SBRG)
{
Name (_ADR, 0x001F0000)
//+ OperationRegion (LPC0, PCI_Config, 0xA0, 0x54)
//+ Field (LPC0, AnyAcc, NoLock, Preserve)
//+ {
//+ , 10,
//+ XPME, 1,
//+ Offset (0x04),
//+ AG3E, 1,
//+ Offset (0x50),
//+ RCBA, 32
//+ }
Device (IELK)
Method (_PTS, 1, NotSerialized)
{
//+ If (LEqual (Arg0, 0x05))
//+ {
//+ Store (One, \_SB.PCI0.SBRG.AG3E)
//+ }
//+ Else
//+ {
Store (Arg0, DBG8)
PTS (Arg0)
Store (Zero, Index (WAKP, Zero))
Store (Zero, Index (WAKP, One))
If (LAnd (LEqual (Arg0, 0x04), LEqual (OSFL (), 0x02)))
{
Sleep (0x0BB8)
}
Store (ASSB, WSSB)
Store (AOTB, WOTB)
Store (AAXB, WAXB)
Store (Arg0, ASSB)
Store (OSFL (), AOTB)
Store (Zero, AAXB)
//+ }
}
### AppleIntelCPUPowerManagment.kext kernelpanic fix, hpet / rtc / tmr
#not that good for quadcores?
Device (PIC)
{
Name (_HID, EisaId ("PNP0000"))
Name (_CRS, ResourceTemplate ()
{
IO (Decode16,
0x0020, // Range Minimum
0x0020, // Range Maximum
0x00, // Alignment
0x02, // Length
)
IO (Decode16,
0x00A0, // Range Minimum
0x00A0, // Range Maximum
0x00, // Alignment
0x02, // Length
)
//- IRQNoFlags ()
//- {2}
})
Device (TMR)
{
Name (_HID, EisaId ("PNP0100"))
Name (_CRS, ResourceTemplate ()
{
IO (Decode16,
0x0040, // Range Minimum
0x0040, // Range Maximum
//+- 0x01, // Alignment
0x04, // Length
)
//- IRQNoFlags ()
//- {0}
//+ IO (Decode16,
//+ 0x0050, // Range Minimum
//+ 0x0050, // Range Maximum
//+ 0x01, // Alignment
//+ 0x04, // Length
//+ )
})
}
Device (RTC0)
{
Name (_HID, EisaId ("PNP0B00"))
Name (_CRS, ResourceTemplate ()
{
IO (Decode16,
0x0070, // Range Minimum
0x0070, // Range Maximum
0x00, // Alignment
0x02, // Length
)
//- IRQNoFlags ()
//- {8}
})
}
Device (HPET)
{
Name (_HID, EisaId ("PNP0103"))
Name (CRS, ResourceTemplate ()
{
//+ IRQNoFlags ()
//+ {0}
//+ IRQNoFlags ()
//+ {8}
Memory32Fixed (ReadOnly,
0xFED00000, // Address Base
0x00000400, // Address Length
_Y09)
})
### internal SATA ports shown as internal Intel ESB2 sata ports
Device (SATA)
{
Name (_ADR, 0x001F0002)
Name (^NATA, Package (0x01)
{
0x001F0002
})
Name (\FZTF, Buffer (0x07)
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
})
Name (REGF, One)
//+ Method (_DSM, 4, NotSerialized)
//+ {
//+ Store (Package (0x02)
//+ {
//+ "device-id",
//+ Buffer (0x04)
//+ {
//+ 0x81, 0x26, 0x00, 0x00
//+ }
//+ }, Local0)
//+ DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
//+ Return (Local0)
//+ }
Method (_REG, 2, NotSerialized)
### usb ports show as internal usbport for fixing sleep, a lot of work
Device (EUSB)
{
Name (_ADR, 0x001D0007)
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x0D, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x3A, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
}
Device (USBE)
{
Name (_ADR, 0x001A0007)
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x0D, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x3C, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
}
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x03, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x34, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x04, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x35, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x0C, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x36, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x0E, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x37, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x05, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x38, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x20, 0x04))
}
//+ Method (_DSM, 4, NotSerialized)
{
Store (Package (0x02)
{
"device-id",
Buffer (0x04)
{
0x39, 0x3A, 0x00, 0x00
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
//+ }
### Network adapter will be shown as onboard fixes UUID/timemachine etc
Device (P0P9)
{
Name (_ADR, 0x001C0005)
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x09, 0x04))
}
Method (_PRT, 0, NotSerialized)
{
If (PICM)
{
Return (AR09)
}
Return (PR09)
}
//+ Device (GIGE)
{
Name (_ADR, Zero)
OperationRegion (GPIO, SystemIO, 0x0800, 0x06)
Field (GPIO, ByteAcc, NoLock, Preserve)
{
GO01, 8,
GO02, 8,
GO03, 8,
GO04, 8,
GO05, 8,
GP9, 1
}
Name (_PRW, Package (0x02)
{
0x09,
0x03
})
Method (EWOL, 1, NotSerialized)
{
If (LEqual (Arg0, One))
{
Or (GP9, One, GP9)
}
Else
{
And (GP9, Zero, GP9)
}
If (LEqual (Arg0, GP9))
{
Return (Zero)
}
Else
{
Return (One)
}
}
//+ }
}
Device (GBEC)
### azalia/hdef AppleHDA compatible inject
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x20, 0x04))
}
//+ Device (HDEF)
{
Name (_ADR, 0x001B0000)
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x08)
{
"codec-id",
Buffer (0x04)
{
0x9B, 0x82, 0x43, 0x10
},
"layout-id",
Buffer (0x04)
{
0x0C, 0x00, 0x00, 0x00
},
"device-type",
Buffer (0x17)
{
"Analog Devices AD1988B"
},
"PinConfigurations",
Buffer (0x20)
{
/* 0000 */ 0x30, 0x40, 0x21, 0x01, 0x10, 0x40, 0x11, 0x01,
/* 0008 */ 0x40, 0x90, 0xA1, 0x01, 0x50, 0x30, 0x81, 0x01,
/* 0010 */ 0x60, 0x10, 0x01, 0x01, 0x20, 0x90, 0xA1, 0x01,
/* 0018 */ 0xF0, 0x11, 0x45, 0x01, 0x70, 0x60, 0x01, 0x01
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
//+ }
}
Scope (\_GPE)
### injecting ATI videocard with DSDT
#use Wormy/x1600 Megalodon/2600/3870 Motmot/4870
Device (P0P2)
{
Name (_ADR, 0x00010000)
//+ Device (GFX)
{
Name (_ADR, Zero)
Name (_SUN, One)
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x16)
{
"@0,compatible",
Buffer (0x0E)
{
"ATY,Megalodon"
},
"@0,device_type",
Buffer (0x08)
{
"display"
},
"@0,display-connect-flags",
Buffer (0x02)
{
0x00, 0x04
},
"@0,name",
Buffer (0x0E)
{
"ATY,Display_A"
},
"@1,compatible",
Buffer (0x0E)
{
"ATY,Megalodon"
},
"@1,device_type",
Buffer (0x08)
{
"display"
},
"@1,display-connect-flags",
Buffer (0x02)
{
0x00, 0x04
},
"@1,name",
Buffer (0x0E)
{
"ATY,Display_B"
},
"device_type",
Buffer (0x14)
{
"ATY,MegalodonParent"
},
"model",
Buffer (0x19)
{
"ATI Radeon HD2600 Series"
},
"rom-revision",
Buffer (0x06)
{
"3169a"
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
//+ }
Method (_PRW, 0, NotSerialized)
{
Return (GPRW (0x09, 0x04))
}
Method (_PRT, 0, NotSerialized)
{
If (PICM)
{
Return (AR02)
}
Return (PR02)
}
}
### Snow Leopard extra sleep fix?
Return (WAKP)
//+ Return (Package (0x02)
{
Zero,
Zero
//+ })
|
|
#340
03-29-2010, 09:25 PM
|
|||
|
|||
|
can someone help me, I used this guide, currently running 10.6.2 using the updated sleepenabler. Is there anyway for me to just use a DSDT file instead of all these kexts in my extra folder along with a DSDT?
I would like to clean out my Extra folder but don't know what is needed, if it helps: ASUS P5K-e wifi, 1305 bios Jmicron disabled, only onboard sound\ethernet enabled. all drives are SATA AHCI (dvd, and hard drives) e6600, 4gb ddr2 667mhz I dunno how to make dsdt file, my current file I downloaded on the first pages of this thread, and it has worked so I left it, but I would love to clean out extra kext's I don't need. 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.
|
Linear Mode
