|
#1
|
|||
|
|||
How-To install Snow Leopard Intel DG31PR (10A432)
hi frnd,
how to install Snow Leopard 10A432(Intel DG31PR) .my system config intel core 2 quad cpu Q8200 2.33 ghz intel DG31PR Motherbord DDR 2 2 GB ram Hdisk 500 GB stata thks |
#2
|
|||
|
|||
KP in AppleIntelPIIXATA
That is a GREAT question Muneernk.
I see that my device id's are already set in the vanilla AppleIntelPIIXATA. I have tested so many different AppleIntelPIIXATA all panic. I have tried my 10.5.8 file - panic I copied my plist ICH data from 10.5.8 to 10.6 - panic If i remove AppleIntelPIIXATA - waiting for root device. Netkas' Intel ATA support for Snow Leopard - panic iDeneb v1.4 10.5.8 Vanilla MB: Intel DG31PR (ICHx,USB,PS2 Fixed) CPU: Intel Core 2 Duo E4500 2.20GHz Video: PNY-NVIDIA GeForce 9800 GTX+ 512MB (Install with onboard Video, Add EFI String to boot) Ram: Corsair 2048MB PC6400 DDR2 Audio: Realtek ALC888(ALC88X Fixed) Net: Working out of box HDD: 3 SATA / 1 IDE (Win Xp, Win 7, OSX86) CD/DVD: LG -R, -R DL, -RAM, -RW, +R, +R DL, +RW Snow Leopard install in progress. |
#3
|
|||
|
|||
DG31PR Fixed
In order to get the DG31PR motherboard to not panic you must change the bios version.
Install this version PRG3110H.86A.0047.2008.0227.1745 This will allow you to install and get going. You will also need to use leopards ioatafamily.kext to make it work. good luck.. |
#4
|
|||
|
|||
No need to flash bios
I did what u said and down graded my bios to the version u posted.
I still had panics, so I went thru the new bio settings to see what changed from the downgrade. All I changed was the advanced settings/drive configuration and disabled auto mode. THAT WORKED! So I decided to flash my bios to latest version and only disable the drive auto mode still worked fine. Thank you for getting me on the right path. Ill report back when I have it all working. iDeneb v1.4 10.5.8 Vanilla MB: Intel DG31PR (ICHx,USB,PS2 Fixed) CPU: Intel Core 2 Duo E4500 2.20GHz Video: PNY-NVIDIA GeForce 9800 GTX+ 512MB (Install with onboard Video, Add EFI String to boot) Ram: Corsair 2048MB PC6400 DDR2 Audio: Realtek ALC888(ALC88X Fixed) Net: Working out of box HDD: 3 SATA / 1 IDE (Win Xp, Win 7, OSX86) CD/DVD: LG -R, -R DL, -RAM, -RW, +R, +R DL, +RW Snow Leopard install in progress. |
#5
|
|||
|
|||
DG31PR no sound and ethernet wont connect..
first of all thanks Aesop69...i had almost given up on the install after getting countless kp's..but after reading your post bam!! sl booted and after setup i rebooted without any flags no problem..even the hdds showing up as folders and du actin up problem went away in 64 bit mode..just soundless and ethernetless for the moment...thanks to all the people in the community..
btw i used instructions for osx86 wiki..its flawless and works 99%.. thanks again. w0rm. |
#6
|
|||
|
|||
Files looking like folders
I found out that using dsmos was the problems for me with drives not looking like drive icons but folder icons so I switched to fakesmc.
Before I switched dsmos for fakesmc diskutil would kp 3/4 way on verify or repair permissions Now all my drives look like drives & no panics When u turn off auto mode in the bios it disables 2 of the SATA ports (Disabled IDE mode) this is not acceptable to me since I have 6 drives installed and making the sata run in ide mode turns off the drives above 4 I still have no sound or PS2 KB or Mouse yet. Retail Snow Leopard installed but still testing. iDeneb v1.4 10.5.8 Vanilla MB: Intel DG31PR (ICHx,USB,PS2 Fixed) CPU: Intel Core 2 Duo E4500 2.20GHz Video: PNY-NVIDIA GeForce 9800 GTX+ 512MB (Install with onboard Video, Add EFI String to boot) Ram: Corsair 2048MB PC6400 DDR2 Audio: Realtek ALC888(ALC88X Fixed) Net: Working out of box HDD: 3 SATA / 1 IDE (Win Xp, Win 7, OSX86) CD/DVD: LG -R, -R DL, -RAM, -RW, +R, +R DL, +RW Snow Leopard install in progress. |
#7
|
|||
|
|||
Any Boot132 Image for this board?
|
#8
|
|||
|
|||
For use SATA in Auto Mode, follow this topic on HMBT Forum. This works. Download IOATAFamily.kext fixed.
http://forum.hmbt.org/viewtopic.php?f=148&t=3793 |
#9
|
|||
|
|||
i installed Snow Leopard (Retail Install DVD) on Intel DG31PR successfully with DellSnow cd from superhai's DellSnow (i used DellSnow.iso v0.5)
updated to 10.6.2 and got sound works now... for usb to work i've added <key>USBBusFix</key> <string>yes</string> into com.apple.Boot.plist (Library/Preferences/SystemConfigurations) in case any one have 9400gt 1gb dvi/vga/hdmi i used these step described in tonymacx86 froum, just follow the exact step: With your 9500 GT, I'd try NVEnabler64.kext. If that doesn't work- here is my workaround for the 9400 GT. You inspired me to lay it all out there- here goes... ENABLE DUAL DISPLAYS & MIRRORING IN 10.6.2 WITH NVIDIA 9400 GT - 64-BIT I've tried everything from DSDT to EFI Strings to device id patching to editing NVEnabler, but the only thing that works is to replace your vanilla graphics kexts with 10.6.1 graphics kexts and use BOTH NVEnabler64 and NVEnabler in System/Library/Extensions. 1. Download http://dl.dropbox.com/u/3315703/10.6.1% ... 0Kexts.zip 2. Download NVEnabler and NVEnabler 64 from http://www.projectosx.com/forum/index.p ... c=370&st=0 3. Open Kext Helper b7 4. Drag all kexts into Kext Helper b7 (should be 11 in total) 5. Type your password and click EASY INSTALL. 6. Close Kext Helper b7. 7. Open Snow Leopard drive. 8. Drag /System/Library/Extensions folder onto Kext Utility 9. Open Applications/Utilities/Disk Utility 10. Highlight Snow Leopard in the left column. 11. Click Repair Permissions. 12. Restart computer. NOTE: My specific card has DVI/VGA/TV-OUT. There are only 2 channels on these cards though- 1 is DVI and 2 is VGA/TV-OUT. You can't use VGA and TV-OUT at the same time. I'm using a DVI to VGA converter and S-video to my TV. With a 1 monitor setup, I can enable QE/CI a number of different ways and use the 10.6.2 vanilla kexts, but the only method to get mirroring and TV-OUT (S-video) is this way. If you come up with a better solution let me know. Good luck- this should work with the 9500 GT- but try just NVEnabler64 first- it may work without all of this stuff !! Last edited by petoeah; 03-04-2010 at 01:31 AM. |
#10
|
|||
|
|||
dg31pr with Snow Leopard
My favorite installation for SL on this mobo is http://osx86.sojugarden.com/ .
This is a super clear retail installation that worked. Attached find my DSDT fixed with no errors nor warnings.Extract and put it in the /Extra folder. In the BIOS, Disable Auto mode on the HD section. Entrar Last edited by entrar; 03-15-2010 at 03:40 PM. |