|
#1
|
|||
|
|||
I couldnt read all the post so please forgive me if its already answered
Were you guys able to get the onboard graphics working? Full resolution and QE support? If so please give me some sort of a guide or tip.... Thanks in advance |
#2
|
|||
|
|||
Dsdt...
Ok, I am for the most part new to dsdt patching.. Here's my problem.
I used the dsdt.aml from the snow.zip. Install goes great, boots up great. Only, I have no networking at all! I have an asus 138g-wl wireless pci card (I think that's it, works well in 10.5). My board is the ES2L version 2, so I know that builtin Ethernet does not work. Anyway, if I remove the dsdt.aml from the zip in this guide and replace it with the one I was using for 10.5 (just the rtc fix), network starts right up.. But I lose the fixes in the new dsdt! Like, the CMOS reset fix, sound, etc.. Any suggestions? I looked at the decompiled versions of the old versus the new, I have no idea what I am looking at though. Thanks. |
#3
|
|||
|
|||
Quote:
Quote:
|
#4
|
|||
|
|||
Hi - this is a noob question
How do install the dsdt.aml file? I ask this because I installed Snow Leopard using the lifehacker guide for another gigabyte board, it works fine, except some things like audio. Now, I know there is a dsdt file in this guide, how can I apply it to my install? Thanks! |
#5
|
||||
|
||||
No issues here with practicaly same mobo so it isnt SleepEnabler related m8.
Are you using all the kexts provided in this (or my) guide? Snow Leopard 10.6.7 Gigabyte GA-P35-DS3P Intel Q6600 @ 3Ghz Corsair CM2X2048-6400DHX Gigabyte HD5770 Silent Cell Samsung SyncMaster 2494SW ALC889a Creative T5400 5.1 Maxtor 380215AS Pioneer DVR-215D Presonus Inspire 1394 KRK Rokit 5 Wacom Bamboo One SL USB Guide => http://www.infinitemac.com/f57/guide...k-drive-t3705/ |
#6
|
||||
|
||||
Quote:
The sleep works in Leopard and SL x32 (i use SleepEnabler.kext in both), but KP in x64. I asked to a member with the same mobo and he has the same problem! Can it be releated with the DSDT.aml i'm using ? any help is appreciated thanks cheers! iHack NB: P35 | SB: ICH9R | CPU: C2D E6850 3.0Ghz | RAM: 4GB DDR2 800Mhz | MB: GA-P35-DS4(rev1.1, bios F14) | GPU: MSI GeForce NX8800GT 1GB | NIC: Realtek R1000 | AUDIO: ALC889a | OS: Retail 10.5.8 & SL 10A432 | BL: Chameleon 2.0RC1(PCEFI v10) + DSDT.aml (sorry my poor English, I'm Italian) |
#7
|
||||
|
||||
Quote:
You are using the 64bit Sleepenabler? Try sleep in x64 safe mode (-x) and report back. Snow Leopard 10.6.7 Gigabyte GA-P35-DS3P Intel Q6600 @ 3Ghz Corsair CM2X2048-6400DHX Gigabyte HD5770 Silent Cell Samsung SyncMaster 2494SW ALC889a Creative T5400 5.1 Maxtor 380215AS Pioneer DVR-215D Presonus Inspire 1394 KRK Rokit 5 Wacom Bamboo One SL USB Guide => http://www.infinitemac.com/f57/guide...k-drive-t3705/ |
#8
|
|||
|
|||
KP waking from sleep
I had a flawless SL install. But had to mess with things. Tried fakesmc by netkas. And had a kernel panic while repairing permissions. Now I get a kernel panic when waking from sleep. Restored my TM backup but still the same. Reinstalled SL using this guide (Install disk image restored to a partition on another drive), no problems there. but still same problem. Anybody have an idea? No package errors in disk utility. Repair permissions completes with no problems in disk utility and kext utility. Rebuilding of mkext also successful for S/L/E and /Extra.
GA EP35-DS3P - Intel Q9550 - 2 X 2GB Dominator 1066Mhz, EVGA 8800GTS 512MB 2x320Gb SATA in Software Raid 0, 1x1.5TB for Time machine and storage (Geekbench 6293) 10.6 Retail 64bit Using DSDT for audio-889a, video-8800gts, ethernet w/TM fix, USB fix, and SATA fix. MacBook 2,1 - 10.6 Retail MacBook 3,1 - 10.6 Retail |
#9
|
||||
|
||||
Quote:
BTW i replaced dsmos.kext with the new fakesmc.kext from netkas. Cheers and thanks for your help! iHack NB: P35 | SB: ICH9R | CPU: C2D E6850 3.0Ghz | RAM: 4GB DDR2 800Mhz | MB: GA-P35-DS4(rev1.1, bios F14) | GPU: MSI GeForce NX8800GT 1GB | NIC: Realtek R1000 | AUDIO: ALC889a | OS: Retail 10.5.8 & SL 10A432 | BL: Chameleon 2.0RC1(PCEFI v10) + DSDT.aml (sorry my poor English, I'm Italian) |
#10
|
|||
|
|||
received a few PM's asking me why they are having a kernel panic and why it's not working with them, again your mileage may vary if you will try this on a different board. i only tested this guide and quite a few times already on my machine with the spec listed on the first page.
dont just secretly send it to me, Please post here the problem and maybe members here including me can help. @ saintjoe, glad that the guide worked for you too bad your having sleep problems, have you tried removing nullcpu and just let the apple PM run? |