#81
|
||||
|
||||
Yea, I can push it there, but then CPU doesn't go to 3.6ghz... I just put that their because they are rated at 1600mhz, but right now their at 1333mhz, there is like no performance change though, I tested.
No, system profiler found it auto. OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#82
|
||||
|
||||
Hmmm. My system profiler just says 2.69. Then again about this mac sees my ram and system profiler doesn't... I just don't like entering the info. I want it to be auto detected like it should be.
I looked at the V8 but ended up going with a Cooler Master hyper N520. It was like 40 bucks and got good reviews. I'd love to eventually go to water cooling though. I'm honestly wondering why your CPU speed is detected and mine isn't. We've got practically identical specs. ~ Snow Leopard Retail w/Empire EFI ~ MSI X58 Platinum SLI ~ Intel Core i7 920 3.2GHz ~
~ Galaxy GTX 260 896mb ~ OCZ 6GB DDR3 1600MHz RAM ~ 500GB Hitachi SATA ~ Sony Optiarc DVD-RW ~ |
#83
|
||||
|
||||
Maybe Chameleon/PC_EFI have some kind of fixes for this? I dunno, you might want to try if your up to it.
Thing is, I had to set "About this mac" CPU to Intel Core i7 manually, but with that, I had to enter speed manually. But It used to change auto, and System Profiler still changes it auto. As you can see, my ram was auto detected, All I did was add a SMBIOS.plist to make sure it says DDR3, thats it. OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#84
|
|||
|
|||
I stumbled across this guide a few days ago and just got around to trying it out, however, I'm running into a slight problem and was wondering if anyone could help out. I currently have 10.5.7 installed on my system but wanted to try out 10.6 but when I try the posted installation method I get a warning and am unable to install on the partition I want. The warning says i must repartition the disk as 'GUID Partition Table' before I can continue. I realize that I could do this using the diskutil tool, however I have been using that particular hard drive for some other things and don't want to fully repartition the drive. I'm curious to know if there is some clever way around this or if reformatting is my only option. I've tried a poking around in a GParted live cd, with no luck.
|
#85
|
||||
|
||||
Theres is a fix for MBR OSInstall.mpkg, search it on google, it exists.
OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#86
|
|||
|
|||
im still having problems.. i think its because my graphic card--- ati 3870
|
#87
|
|||
|
|||
Thanks for the intel on the cracked OSInstall.mpkg, x. I'm still having some considerable trouble getting this install to work. I have followed your instructions pretty rigidly but no luck, I keep getting kernel panics right when I boot up. I've tried to install all of the kexts in the /Extra/Extensions folder and I've also tried to install them in the S/L/E folder, repairing permissions whenever I do it. Really, I'm not sure what I'm doing wrong :/
|
#88
|
|||
|
|||
X, do you know of any reason this wouldn't work on x58m? Seems to be same components for the most part. I'm planning on starting in the next week or so. I've built pc's, but never a hack. So I'm a flat out noob. I'll be starting with non-formatted drives and going from there. I'm sure I'll have lots of questions.
Thanks for all your hard work. |
#89
|
|||
|
|||
Hi,x986123. Good to see you again.
I'm still working on to get my Snow Leopard more perfect since I followed your guild to get it installed a few months ago. The biggest problem I'm having is I can't get the vanilla AppleHDA.kext working since there's no Built-in Audio info in System Profile with VoodooHDA.kext which would stop Avid Media Composer from launching. Is there anyway to fix that by modifying the DSDT? I posted my full question here. http://www.insanelymac.com/forum/ind...owtopic=205748 If you could take a look,I'd so appreciate. Thank you again for your wonderful guild which at least got my Hac in the first place i7 920 MSI X58 Platinum SLI DDR3 1066 2GB x3 EVGA Geforce GTX 280 1024MB 1TB SATA2 x2 - RAID 1.5TB SATA2 (JMicron Port,GPT,installed Snow Leopard) BenQ G2412HD 1920x1080 LCD Snow Leopard [Vanilla] 10.6.2 Chameleon RC4 |
#90
|
|||
|
|||
I was able to load SL, but after I go through the setup I am unable to log in. It doesn't recognize username or password. I re-setup and tried without a password, but no luck. Any thoughts?
MSI X58M I7 920 BFG GTS 250 1gb 4gb DDR3 Retail Snow Leopard 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |