#61
|
|||
|
|||
yeap its the same pathmapid in both places.
I'll double check the dsdt. |
#62
|
|||
|
|||
Airwalk did the AppleHDA leopard kext you're using ever list all of the audio configs in system profile?
i7-965 / EVGA x58 / Radeon HD 4870 1 GB / 12 GB DDR3 @ 1600mhz / Snow Leopard |
#63
|
|||
|
|||
the reason I was asking that airwalk is because I never had leopard on this board so I have been using your leopard kext that you posted on another forum and after comparing my modified SL kext with some of the others I have seen here I realize that I have significantly less child nodes in my modified sections than other people do...
i7-965 / EVGA x58 / Radeon HD 4870 1 GB / 12 GB DDR3 @ 1600mhz / Snow Leopard |
#64
|
|||
|
|||
when using the old applehda I think its version 1.5.7.... I allways get system profiler to show the ports correctly.
see screenshot of this applehda 1.5.7 running in SL and it looked the same in Leopard also. |
#65
|
|||
|
|||
mormegil-
I tried another approach, using lagacyapplehda files I port the same config to the lagacy files and put it in /extra/extensions and put the stock applehda in /S/L/E. in doing so I was able to set the system profiler to show all the ports but in system prefs. there are no inputs and outputs to select from. any thoughts ? |
#66
|
||||
|
||||
Alright Mormegil, been a while m8, all good with you?
Since the 10.6.2 update messed up my audio I was wondering if you could take a look at my already slightly (but apparently non working) modded AppleHDA kext. http://www.mediafire.com/file/mikkmb25bzz/AppleHDA.zip Thx in advance bud ps. using AppleHDA v10.6.1 for now Snow Leopard 10.6.7 Gigabyte GA-P35-DS3P Intel Q6600 @ 3Ghz Corsair CM2X2048-6400DHX Gigabyte HD5770 Silent Cell Samsung SyncMaster 2494SW ALC889a Creative T5400 5.1 Maxtor 380215AS Pioneer DVR-215D Presonus Inspire 1394 KRK Rokit 5 Wacom Bamboo One SL USB Guide => http://www.infinitemac.com/f57/guide...k-drive-t3705/ Last edited by Snow; 11-10-2009 at 03:59 PM. |
#67
|
|||
|
|||
ok everyone with the evga x58 mobo here is the solution to get HDA working in 64 bit mode.
voodoohda.kext haha just kidding..... 1st thank you to everyone that helped in getting this done. 2nd remove and voodoohda you have what is accomplished. 32 and 64 bit audio using stock applehda.kext in /S/L/E you must have your dsdt.aml patched with the following info codec-id", Buffer (0x04) { 0x89, 0x08, 0xEC, 0x10 }, "layout-id", /**** Is ResourceTemplate, but EndTag not at buffer end ****/ Buffer (0x04) { 0x79, 0x03, 0x00, 0x00 Install the stock applehda.kext in /S/L/E ( I used the one from 10.6.2 update) using kext utilities 2.3.2 and install the attached LegacyHDA.kext in /Extra/Extensions using kext utilities 2.3.2 update mkext. it will give you 4 outs and 2 ins. testing in 32 and 64 bit mode. the advantage of doing it this way (at least for me) is that I dont have any modified kexts in /S/L/E. give it a shot and report back. Good Luck Last edited by airwalk776; 11-14-2009 at 04:45 PM. |
#68
|
|||
|
|||
i will test it out and report back in a few, you're the man airwalk
i7-965 / EVGA x58 / Radeon HD 4870 1 GB / 12 GB DDR3 @ 1600mhz / Snow Leopard |
#69
|
|||
|
|||
Confirmed working. Hopefully netkas has an epiphany that he should make evga x58 boards sleep sometime soon. In the meantime lets plug away, did you ever have sleep working in 10.5?
i7-965 / EVGA x58 / Radeon HD 4870 1 GB / 12 GB DDR3 @ 1600mhz / Snow Leopard |
#70
|
|||
|
|||
Quote:
I have to do it for my own codec anyway so took some time to do it for yours too. 10.6.1/10.6.2 AppleHDA patched for ALC889A http://www.mediafire.com/file/gm25ym...leHDA_889a.zip 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. Core2Quad / MSI P45 Neo2-FR / HD4870 / Snow Leopard |