Hi there!

My specs
Cpu: Amd Athlon 64 3200+ (Venice) (socket 939) (SSE,SSE2,SSE3)
mainboard: Ashrock 939 dual sata2 (chipset ULi M1695) link : http://www.asrock.com/mb/overview.asp?Model=939Dual-SATA2
Ram 1GB (2x512)(kingstone)
Gx Card: Geforce FX5200 128MB (AGP)

First of all,the motherboard I have the only thing that works out of the box is IDE1and without UDMA(2mb p/sec) only,even with tiger or leopard.
I have found some kexts for on board lan ,no kext for audio alc850,and i found a way to bypass the problem of the ide1 only by using appleviaata fron myzars tiger,and putting the uli chipset id (0x522910B9)on the sata section and the result was that when I go to system profiler it says that I don’t have any ata device and ide1 ide2 and my sata hd appears everything as sata devises even the dvd rom.so i have managed to enable ide1 ide2 ,UDMA and sata controller.That kext works on tiger and on leopard.

Zephyroths 10.5.1 is working perfectly,except alc850, when I load the kexts after install.
I tried 10.5.2 but no success It stops at the two minute left,and as on 10.5.1 the installation takes about 2 hours(no udma).
So I tried to inject that appleviaata kext with help from the wiki on both iso’s but I have problems on both.
On 10.5.1 the dvd seems its not bootable at all.
And on 10.5.2 I boot from dvd the system profiler can see everything as sata,the installation takes only 20 min from 2 hours that it was before but now it stops at 1 min left.when I boot I get waiting for root,and with windows I used transmac and at the extension folder I cant see appleviaata anywere,its like its not being installed.
I have followed info from wiki using 10.5.1 and I tried other ways on windows also but the same
Can somebody help me with some detailed info please?
Ps sorry for the big post but I wanted to post details because somebody might get help also.
Thanks!