Hello,

I have installed mac osx86 before(rev.1 10.5.1) I erased it later but, I just try to say I installed before
But now I just get a flicking "_"
So I searched on the wiki and found:
But I did that and I'm 100% sure I did that right, but still it won't load OSX
Can somebody please help me

I had the same problem using Zephyroths 10.5.2 on one machine. I don't know why it happens. If I'm installing my myzar 10.4.6 system again it works, but after installing 10.5.2 I can't boot with it. Really crazy.

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

Yep same thing, 10.5.1 was fine, 10.5.2 won't load

I hate bumping, but I can't do anything now and I really want to boot OSX

You have to install the guid bootloader the guide is on the wikidot

There was an error in rev 1 that if you used guid then it wouldn't install the boot loader

Try

There's an issue with the script that installs the GUID bootloader.

Easy to fix :

1 - Boot with the DVD.
2 - Press F8, then type "-s"
3- type "cd /usr/standalone/i386"
4 - type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1 (X is the disk number and Y is the partition number on which you installed Leo)
5 - type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1
6 - type "./startupfiletool -v /dev/diskXsY ./boot_v8"

for problems with these releases go to http://osx86.wikidot.com/how-to-s and http://osx86.wikidot.com/known-issues

Thanks, but it didn't work
It now says "b0 error" at boot

Now try the fdisk commands, then it should work.

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

Now I get, "HFS+ Partition error"

boot into install dvd and open diskutility select the correct partition scheme click in "partition" , "options" and select GUID or MBR, apply and install again selecting the correct bootloader.