03-03-2009, 04:29 AM
|
Cheetah
|
|
Join Date: Mar 2009
Posts: 7
|
|
Hi pentiumpc,
I've been looking through my Asus EeePC 1000H dsdt.aml and am trying to understand the _SB methods better.
Does this sound right ?
Method - Description
PBL (S/G) = BackLight
CAM (S/G) = Camera
CRD (S/G)= Card Reader
WLD (S/G) = Wireless Lan Set / Get
CFV (S/G) = FSB Speed & Voltage Set / Get
CAM (S/G) = Camera Set / Get
BTH (S/G) = BlueTooth Set / Get
SDSP = Switch/Swap Display
CRD (S/G) = Card Reader Set / Get
HDPS = ???
PBP (S/G) =
M3G (S/G) = Mobile 3G
HWCF = ??
GNVS = Get Volume (I'm sure this is wrong. Probably gets and sets memory references???)
SNVS = Set Volume (I'm sure this is wrong. Probably gets and sets memory references???)
I've managed to get the Camera, Bluetooth to turn of using the spare Fn key (0x1d). I tried to get the wifi working but I noticed the method call is a little more complex than a simple ATKN(value).
It appears to have some logic in it to determine which value to pass 0x11 or 0x10. I can only get it to turn off and then it will not turn on (my logic is missing probably).
I can also confirm that the Asus Test kext you made registers all buttons correctly except the Wifi Off Fn key says something about an unmapped method and then I get messages about either the Bluetooth of Wifi failing to go into powersave state. As soon as I press the Wifi Fn key again the messages stop.
What are your thoughts on this?
Regards,
Steve.
Last edited by Slither2008; 03-03-2009 at 10:15 AM.
|